Banners & Signs

Custom Event Tents

Full color pop-up tents printed with your team, school or organization's colors and logo. Choose a 10 x 10, 10 x 15 or 10 x 20 tent on a heavy-duty aluminum frame, then add printed walls, flags and accessories. Pick what you need and send us a quote request.

St. Anthony's Lacrosse 10 x 20

Choose your tent

Every tent is printed with your colors, logo and wording. Add a tent and any walls, flags or accessories to My Quote, then fill in the quote form.

10 x 10 ft Event Tent

Our most popular size. A full color printed canopy on a heavy-duty aluminum frame.

See options

10 x 15 ft Event Tent

More room under cover for teams, booths and sponsor areas.

See options

10 x 20 ft Event Tent

Our largest tent, with double the shade of a 10 x 10.

See options

Tent Flags

Feather or teardrop flags that clamp right onto a tent leg.

See options

Printed Half Walls

Waist-high printed walls that guide people to your opening.

See options

Printed Full Walls

A full-height printed backdrop that closes off any side of the tent.

See options

Frame & Accessories

Frame only, wheeled bag, sandbags, mesh sidewall and wall or flag hardware.

See options

Options & specs

Tap a section to see the details. Not sure what you need? Tell us how you will use the tent and we will suggest a size and add-ons.

10 x 10 ft Event TentPackage, frame, canopy, size, weight, walls, bag, weights
Sample 10 x 10 ft tent with a full wall and two half walls.
Sample design with full and half walls
Package
Printed canopy with frame, or the printed canopy only to refresh a frame you already own.
Canopy
10 × 10 ft canopy in 6 oz. weatherproof tent fabric (600 × 600 denier), dye-sublimated in full color and finished with a white reinforced strip. Scratch and weather resistant.
Frame
Heavy-duty 40 mm hex aluminum frame (1 mm wall) with telescopic legs that adjust the height.
Set-up size
About 120 × 120 in., from 124.5 in. to 137 in. tall depending on the leg setting.
Weight
About 51 lb for the full package (43 lb frame plus 8 lb canopy).
Walls
Full walls fit any of the four sides. Up to four half walls, alone or mixed with full walls.
Carry bag
A standard carry bag comes with the frame. Upgrade to a heavy-duty wheeled bag with an extra compartment for graphics.
Weights
Optional sandbags, each holding up to 50 lb. Sand is not included.
Built in
The roof truss opens with a crank handle, and each leg has a foot plate ready to stake down. Ropes and stakes come with the frame.
Mesh sidewall
An optional 10 ft mesh sidewall kit is available for this size.
10 x 15 ft Event TentPackage, frame, canopy, size, weight, walls, bag, weights
Sample 10 x 15 ft tent with a full wall and two half walls.
Sample design with full and half walls
Package
Printed canopy with frame, or the printed canopy only to refresh a frame you already own.
Canopy
10 × 15 ft canopy in 6 oz. weatherproof tent fabric (600 × 600 denier), dye-sublimated in full color and finished with a white reinforced strip. Scratch and weather resistant.
Frame
Heavy-duty 40 mm hex aluminum frame (1 mm wall) with telescopic legs that adjust the height.
Set-up size
About 175 × 120 in., from 124.5 in. to 135 in. tall depending on the leg setting.
Weight
About 60.5 lb for the full package (54 lb frame plus 6.5 lb canopy).
Walls
Full walls come in a short-side (10 ft) and a long-side (15 ft) version. They are not interchangeable, so tell us which side each wall is for. Half walls fit the short (10 ft) sides only, up to two per tent.
Carry bag
A standard carry bag comes with the frame. Upgrade to a heavy-duty wheeled bag with an extra compartment for graphics.
Weights
Optional sandbags, each holding up to 50 lb. Sand is not included.
10 x 20 ft Event TentPackage, frame, canopy, size, weight, walls, bag, weights
Sample 10 x 20 ft tent with a full wall and two half walls.
Sample design with full and half walls
Package
Printed canopy with frame, or the printed canopy only to refresh a frame you already own.
Canopy
10 × 20 ft canopy in 6 oz. weatherproof tent fabric (600 × 600 denier), dye-sublimated in full color and finished with a white reinforced strip. Scratch and weather resistant.
Frame
Heavy-duty 40 mm hex aluminum frame (1 mm wall) with telescopic legs that adjust the height.
Set-up size
About 235 × 120 in., from 124.5 in. to 135 in. tall depending on the leg setting.
Weight
About 80 lb for the full package (72 lb frame plus 8 lb canopy).
Walls
Full walls come in a short-side (10 ft) and a long-side (20 ft) version. They are not interchangeable, so tell us which side each wall is for. Half walls fit the short (10 ft) sides only, up to two per tent.
Carry bag
A standard carry bag comes with the frame. Upgrade to a heavy-duty wheeled bag with an extra compartment for graphics.
Weights
Optional sandbags, each holding up to 50 lb. Sand is not included.
Printed Full & Half WallsSizes, printing, how they attach, hardware
Sample 10 ft tent with a printed full back wall.
10 ft full wall
Sample 10 ft tent with two printed half walls.
10 ft half walls
Sample 15 ft tent with a printed full back wall.
15 ft full wall
Sample 15 ft tent with two printed half walls.
15 ft half walls
Sample 20 ft tent with a printed full back wall.
20 ft full wall
Sample 20 ft tent with two printed half walls.
20 ft half walls
Material
6 oz. weatherproof tent fabric (600 × 600 denier), dye-sublimated in full color with a white reinforced strip. Scratch and weather resistant.
Full walls
Single-sided. Sewn-in hook-and-loop straps wrap the top bar and legs, so no extra hardware is needed. The wall hangs from just under the canopy to about 4 in. off the ground and also works as a wind break.
Half walls
Single or double-sided. A pole pocket runs along the top and hook-and-loop straps hold the sides. Each half wall needs half wall hardware: one telescopic aluminum pole and two hex clamps.
Full wall sizes
Short side (10 ft): 113 × 78 in. Long side on a 10 × 15: 170 × 78 in. Long side on a 10 × 20: 228 × 78 in.
Half wall size
113 × 39 in., for 10 ft sides.
Where they go
10 × 10: full walls on any side, and one to four half walls. 10 × 15 and 10 × 20: full walls on short or long sides, and up to two half walls on the short sides.
Tent FlagsShape, size, printing, connector
Sample tent with a feather flag clamped to one leg.
Sample tent with a feather flag
Shape & size
Feather or teardrop, in small or medium.
Printing
Dye-sublimated on 4 oz. polyester, single-sided (shows through on the back) or double-sided.
Connector
A hex clamp holder made to grip the tent leg, so the flag flies right from the tent. Comes with the pole and flag.
How many
Add one flag, or one on each leg for the full look.
Frame & AccessoriesFrame only, bags, weights, mesh sidewall, hardware
Tent frame, wheeled carry bag, sandbag, clamps and half wall pole.
Frame, wheeled bag, sandbag and hardware
Frame only
The 40 mm hex aluminum frame without a printed canopy (graphic not included).
Wheeled carry bag
A heavy-duty rolling bag with a compartment that holds one canopy, or one full wall and two half walls.
Sandbags
Set of 4. Each holds up to 50 lb. Sand is not included.
Mesh sidewall kit
A 10 ft mesh sidewall for the 10 × 10 tent.
Half wall hardware
One telescopic aluminum pole and two hex clamps per half wall.
Flag holder hardware
The hex clamp that mounts a flag pole to a tent leg.
Artwork & PrintingFile types, color, resolution, templates
Edge-to-edge color
The whole canopy is dye-sublimated, not covered in vinyl decals, so your design runs seam to seam on all four peaks and valances. Each side can have different artwork.
File types
JPEG or a single-page PDF.
Color & resolution
CMYK color at 150 dpi at full size. Convert spot or Pantone colors to CMYK and outline all fonts.
Layout
Build the art at the ordered size on our tent template. Leave off crop marks and bleed.
Not sure?
Send your logo and colors and we will lay it out for you. See our artwork resources for file tips.
Care & Set-up TipsCleaning, folding, storage
Cleaning
Hand wash with a soft brush, mild soap and warm water. Do not machine wash.
Folding
Take the canopy off before you collapse the frame.
Windy days
Stake the foot plates or add sandbags to every leg.

How to order

  1. Pick a size and frame

    Choose a 10 × 10, 10 × 15 or 10 × 20 tent, with or without the frame, then add walls, flags and accessories with Add to My Quote.

  2. Send your artwork

    Email your logo, colors and wording to Sales@trophyhut.com. See our artwork resources for file tips.

  3. Get your proof

    We lay out your canopy and walls on the tent template and send you a proof with your quote.

  4. Approve it

    Ask for changes until it looks right. Nothing is printed until you approve.

  5. We print it

    Your canopy and walls are dye-sublimated in full color on weatherproof tent fabric.

  6. We ship it

    Your tent ships ready to set up. We confirm timing with your quote, so tell us your needed-by date.

Questions

Which size should I choose?

A 10 × 10 is the most common size for a team or booth. A 10 × 15 or 10 × 20 gives more shade for bigger groups, sponsor areas or a long table.

Can each side of the canopy have different artwork?

Yes. Each of the four peaks and valances can have its own design.

Can I order just a new canopy for a frame I already have?

Yes. Choose the canopy only and tell us the size. A frame on its own is also available.

Can full walls go on any side?

Yes. Full walls attach to the top bar and legs with hook-and-loop straps. On 10 × 15 and 10 × 20 tents, the long-side and short-side walls are different sizes, so tell us where each one goes.

What comes with the frame?

The frame comes with ropes, stakes and a standard carry bag. A wheeled bag and sandbags are available as add-ons.

What fits in the wheeled bag's extra compartment?

One canopy, or one full wall and two half walls.

How do I clean the tent?

Hand wash with a soft brush, mild soap and warm water. Do not machine wash. Always take the canopy off before you collapse the frame.

How long does it take?

We confirm timing with your quote. Tell us your needed-by date in the form.